Category: Action figures (articulated)

Tablis – Evangelion

This was a figure I was considering for a long time, then finally had the opportunity to add it to a Suruga-ya order for a reasonable price:

image

“No pants” Tablis – an angel from Evangelion. She comes with an alternate arm if you don’t want her holding the weapon, but where’s the fun in that? This figure of Tablis has a few hints to its human counterpart in the grey hair, orange undershirt and white overshirt. Not sure where he lost his pants to though. There is some underwear under that shirt though. I like the body sculpt, but the face feels overly simplistic compared.

Left:

image

The wings have a nice amount of depth to them, and the stand holds them well, to prevent any kind of sagging over time. You could choose to leave this part off, if you wish to risk it. The shoes are nicely painted, but this side does look overly flat.

Right:

image

Not too much extra to see here. Hair has a pretty decent sculpt.

Back:

image

The wings are definitely the star feature of this figure – I love the shiny finish, and the sculptwork is really nice. Love all the different wing segments, which really adds to this figure. 

Weapon:

Here we have the words “TEST TYPE” and “A-17 TABRIS”. I like this little detail, but kind of wish it was on the other side or both sides, so it’d be showing in its natural position. The arm isn’t super-poseable, so it’s not easy to show the writing when displayed.

Really glad I decided to get this figure. For me, this concludes the ones of the set I was really after. There is another Rei-based one I’d like, but it’s rather hard to get hold of, so I’m not anticipating getting it. Overall, I’m pleased with this figure, and especially so with the wings. Would recommend these figures at a reasonable price, but they’re not super-detailed so wouldn’t recommend them much over their retail price. 

Gelmar – Devilman

Wandering around Yahoo! Auctions Japan for Devilman merch, I came across this Gelmar figure, and decided I’d bid on him. He didn’t come with a box, which was advantageous for me, so I could pack him with another item (which will be featured in a future blog, but not for some time). 

So here he is:

I love his blue, shiny colour and his overall design. His sculpting is also fairly detailed. 

Face close-up:

He does have a bit of a paint scratch on one tooth, but it’s not too bad. The wings on his head are detailed nicely, and I like the tentacley things sticking out from the sides. The teeth also have a couple of different coloured paints, which adds to their detail. 

Gelmar’s “slug”:

Rawrgh. He’s also painted well, in the places that were painted. Due to this part being partially rubbery, he was sticky with plasticiser, but I washed most of it off. He did smell a bit because of it too. 

And for the reason he’s rubbery:

He contains some unfortunate souls! Getting this part out isn’t too bad, but putting it back in can be a pain – it only fits in properly in one orientation, so it can take some fiddling to get it right. 

Close-ups of this part:

Looks like he’s munched up these dudes well. This part is nicely sculpted and painted. 

Top of Gelmar’s head:

Here you can see some of the shininess of the blue parts. He has a well sculpted spine, and I like the claws protruding from his shoulders.

Left:

I like the fact he has very different textures on his harms to his body – the contrast works well, and the details definitely make up for the lack of varying colours in the character design. 

Right:

I love the overall monstrous shape of his body. With his tail, he’s pretty stable, but for me, his tail does slip out easily if I move him. Loving all the small details and his clawed hands.

Back:

His back isn’t short of details in the sculpt, which is nice. Here you can see where his tail part is two segments, for the soft rubber part. The blend is handled reasonably well though. He does have some limited articulation, but other than moving his harms, none of it is really worth messing about with for me. 

Overall, I’m really happy I decided to go for this figure. I love his devilish appearance, and the blue metallic colour is attractive to me. Would recommend this figure, but he can sometimes be pricey in the aftermarket. He does have other colour variants, but I don’t think I’ll attempt to chase them down.. however I’d consider buying one if I see one come up at a reasonable price if I’m on the hunt for Devilman loot again. 

Alien – Clear ver – Alien Resurrection

Saw this dude on Mandarake and decided to add him to an order. Was on the fence as I don’t always go in for clear versions of things, but the coloured version of this figure I have is in poor condition, and, well, it’s a Xeno. 

Front:

I was pleasantly surprised by this figure – the details are reasonably visible, thanks to the figure size and the yellowish tint. Not sure if the yellow tint is intentional or something that’s developed over time, but it works for me, lol. 

And yeah… I still had the Demogorgon on the table… He will balance without a stand, but he’s much easier to balance with one. 

Left:

I like the tail on these figures – works well to counterbalance the figure, and looks good. I like the details in the sculpt on the legs and his chest.

Head close-up:

He doesn’t have any detail on his dome, but the side moulding makes up for it. Plenty of tendony things going on here. 

Right:

His “pipes” have a nice texture sculpted onto then. His splayed feet do help significantly in balancing him too.

Arm close-up:

I like the flange detail, and they’ve also captures the round markings. His arms also rotate at the shoulder, which gives you some customisability to his pose. His hips also rotate, which is mostly useful for balancing purposes, and you can rotate his head a bit, but I don’t find that too useful. His tail can also rotate at the base, if you want it pointing sideways.

Back:

Here we can see his spine is sculpted, and some of the details on his legs. The tail works well with the pose.

Overall, I’m happy I got this. I wouldn’t pay a huge amount for him, but for the bargain price I paid, I’m certainly happy with him. 

Zombie Pigman – Minecraft

This figure I picked up at the same time as the Demogorgon because I sort of semi-collect these figures… and he was a fiver.

Presenting… Zombie Pigman:

He’s gonna cut yah… I like the fact that this figure has been done with two levels on his head, instead of it being flat – it definitely gives extra depth and detail to the figure. The paint alignment is a bit eh in places, which isn’t unusual for these figures unfortunately. Overall though, it is faithful to the design in the game.

Left:

Here we see the design on the side, with the Zombie Pigman’s skull showing through. Sword looks OK, but the alignment has wonked over to the left a bit on mine. 

Right:

Figure looks OK, netherstone block looks good, but the print on the sword isn’t the best. 

Back:

Print alignment? Who ares about that? Erm, don’t think I’m going to look back here much if I can help it. 

Well, it’s one of the Minecraft figures. Paint’s janky, found an official distributor’s pic, and their pic wasn’t much better than mine… It doesn’t look quite so janky at a bit of a distance, so it is what it is. Nice to have an addition to the Minecraft shelf, though. 

Hela – Thor: Ragnarok

Here is a figure of Hela, from her appearance in Thor: Ragnarok:

This figure I kind of missed in stores, then had to pay UK RRP when I saw her in a figure store, and didn’t want to let her out of my grasp again. I love Hela’s look, and was happy to have an opportunity to have a larger figure of her, as I only have the Eaglemoss figure prior to this. 

In the box, she definitely looked the part, out of the box… let’s see. When I first got this figure, I put her on the kitchen table, but with no stand. She then ended falling over (on the table, not off it) and all four parts of her headpiece came out. And then they were a bugger to get back in, requiring the assistance of a hairdryer. So, erm, be careful of that. And that’s why I borrowed the Demogorgon’s stand for this photoshoot. 

Face:

I love the helmet, and the face is painted well. What I love less… is her cape. They’ve made it floating so it doesn’t restrict the movement of the arms, and so you can use it to hide her arm joint, but… it has a habit of going into a mess like in this photo. I’ll probably have to heat and then “freeze” it to get it to stay in a halfway decent spot :/. 

The green paint on her top is done very nicely, and it is a nice, appealing (and shiny!) shade. With the lined pattern of her top though, I wish they didn’t bother with a cut joint tbh – figures like this always look stupid when it’s not properly aligned. 

Left:

The horns on her helmet have a good amount of depth to them, which makes them have an impressive look to them. Her sleeves are painted nicely, and she seems not too big in the chest area. 

Right:

Here you can see the cut joint being a bit blergh. Can we have extra foot/hip articulation and do away with this cut joint? Face looks nice though. 

Weapon:

A nice pattern to it, but fairly simple. Doing some quick web research, it is supposed to be just black, so we can let them get away with not putting paint accents on the weapon this time :). We can also see her painted fingernails here, which is a nice touch.

Back:

Cape looks decent enough on the back. Texture isn’t too plasticy and we have some shiny bits up top. Overall, probably one of the better capes I’ve seen on a PVC figure.

Overall, I’m glad I finally got her, and can see why she was a popular figure. She’s a decent bit ahead of other figures of this type, though she has a couple of annoying flaws. Wish the cape was a bit different so it wouldn’t float about like it does. Maybe have some kind of fastener on the ends of the loose parts so that they can be clipped in when you’re done posing? Also some glue for the helmet horns wouldn’t have gone amiss. 

Demogorgon – Stranger Things

This is a figure I aimed to chase down on release, and found it at a local comic book store for a good price.

So here he is:

image

Love the paint on his erm, face? The body paint is also really good, and gives the figure extra depth and detail. 

“Face”:

The teeth are done well, and there’s some lovely blending in the red paint. Love the fact they’ve added the bony protrusions on its “leaves” as well as having he teeth ring. Wouldn’t want to get too up close and personal with that!

Left:

image

He has been textured well throughout, and I like the clawed hands.

Right:

image

The textures and colours are good on this side too. Joints blend in decently well, where they show. 

Back:

The leg joints are very square. It looks fine when he’s standing straight, but moving the legs at an angle like his left one is in this shot… looks a little odd. Again, the texturing is very good. The rest of the joints have been made to not stand out too much, so it’s just the leg joints that are an issue. 

Base:

The base has the logo on, but however you pose him, it’s going to obscure a good chunk of the logo. I like having a logo on the base, but feel it’s kind of pointless if the figure’s foot is going to cover it… still, it’s a nice touch, even if it isn’t the best execution.

Overall I really like this figure and glad I got him. Think he’s a bit prone to fally-over, but I’ll find out over time. He doesn’t seem too hard to balance, just that you will have to balance him to ensure he poses OK. If you wanted him in more of a fighting position, you may want to invest in a claw stand. Really glad I got him. 

Amon – Apocalypse of Devilman

The third and final figure of this set is Amon:

Big brute! He has a pretty large presence, with his bulky chest and muscly arms. He’s also the tallest of the three. I love the big head wings and the furry texturing on his legs. His torso also has a better blend than Devilman’s, making it a less jarring transition. 

Left:

Not too much to see on the site – the hairy arm texture looks good though, and his feet have a fair amount of sculptwork going on. Love the added veins. 

Right:

Here we see more hairy texturing – and the hair seems fairly well blended on his ankle to his foot. Those elbow claws must get in the way though!

Back:

Not a big fan of the sculpting on the red parts of his back – seems kind of.. unrefined? Not quite the same level of detail as the front of the figure for me. The rest of his back looks OK though, and he has a nice end to his tail.

Though for my figure, I knew he was coming in a sun-damaged box, but apparently the base is also prone to sun damage, and that had yellowed too – the other figures did have yellowing to their boxes but not to the bases. Hence why it is a more yellow piece in the other blogs.

And for this blog, here is all three together:

They do overlap a bit too much for my liking, but definitely look impressive as a set. Glad to finally have the set, even if one is a bit yellowed. Would recommend this set if you can get them at a reasonable price, but getting hold of Devilman and Amon might be quite the challenge. Saylos seems to be fairly readily available when I was hunting this set, but the other two… not so much. 

Super-glad I can now display them together!

Devilman – Apocalypse of Devilman

Ever since I got Saylos from this set, I’ve been wanting to get the other two. And thankfully both turned up on Mandarake! 

So here is Devilman:

image

I love the blue-purple colouring of his body, and all the details in the body sculpt. The lower parts of his arms blend well to his arms, but below the torso… not so well. 

Face:

image

His face looks good, and the antennae came out well. I love the little fangs poking out of his mouth. 

Left:

image

Here we can see he leans forward slightly – this can be slightly annoying for balance, especially as his ankles aren’t the tightest joints. The body detailing extends to his sides, which I’m appreciating in this photo, and his hands look nice n’ spiky. 

Right:

image

Here we can see more of his tail, which looks like it has a lethal end. I like the way it curls down to the side of his body. He has plenty of spiky details.

Back:

image

The backs of his wings don’t really have any details to speak of, but the body has some sculpting. Here we can see how he is flicking his tail behind his back. 

Close-up of the wings:

image

Here we can see the wings are hinged – I like the fact they included this articulation, so you have a bit more in terms of posing options for him. 

Overall I rather like this figure and glad I got him. Certainly a worthy addition to the set.

As a bonus picture, here are the three bases for all of the figures:

image

Yes, one of them is a bit yellow, which I’ll go into in tomorrow’s blog. The skeleton effect is excellent, and does look very neat imo. Love the amount of designwork that went into these bases. Though having two foot pegs for all of the figures would’ve been nice… 

EVA-02 Beast Mode – Evangelion

Now onto EVA-02… in beast mode. Decided to go for this one over the normal EVA-02 as it is a much more interesting look to it. 

So here she is outta the box:

Grragrarrrgghh. I love the cores popping out of its back, and the hunched pose. Though working out what to do with the feet was a bit problematic. It doesn’t pose very easily imo, and feels a bit of a strain to get it looking good. I love the paint on the legs, and the overall beastly look. 

Close-up of the face:

You can leave the blood off the top of its head, and there is a picture on the box, including the issue of doing so – you’re left with an odd, flat bit and a hole in the head that doesn’t look good if the top of its head is showing. 

Here we can see some of the sloppy paint – a white dribble on its chin, and some orange creeping out from underneath. Overall, there’s a few lines that aren’t neat here, giving the overall painting a bit of a scruffy look. The jaw does move though, so it has that going for it. 

Another effect for the head:

This one is a little awkward to get into place,  but looks cool once done. Fire! 

From the top:

Gives a good feeling of motion, and the paint jobs are done nicely on these effect parts imo. 

Left:

I think the hunched-over part of its back has been done very well, and I love the blending of colours here, plus the shape. You do get a sense of the inorganic giving into the organic. Looking at that arm in the foreground, I am definitely seeing some wandering grey paint. Also a paint chip on its back – recessed part, near the reflection. There are a couple of paint chips, and the paint feels like it could be easily chipped. It’s part of why I’m not so happy with these Evangelion figures – they’re not finished to a high standard, which doesn’t make them look as good as they should close up. It leaves me kind of frustrated, as there aren’t many options for articulated EVAs, and they’re figures I feel work well with articulation. I like the size of these too – you can fit a few in a display, unlike my model kit EVA-01. 

Right:

Still liking that blood splatter from the head – at least I think it looks good on the figure. The colour blends look good on this side too. Also we have the equipped “claw” – I did have both equipped at one point, but needed to remove the other as it was getting in the way of photos. 

Close-up of the “claw” swipe-lines:

These are supposed to be giving the hands motion, to show The Beast clawing at things. I think they kind of work. However, putting them on the hands is a bit of a tricky challenge, but once all four fingers are in, they stay on OK. I think it’d be cool to have two EVAs fighting, and use this effect. 

Back:

Here we get to see the cores closer… and that damn scratch. I’ll just keep looking at the cores/rods… yeah.. I like them. 

EVA in the box:

Now for some first impressions time… I love the way the figure was presented in the box – the pose looks really good and certainly looked good when it was boxed. If I saw it in a shop, I’d definitely pick it up and look at it, even if I didn’t know Evangelion. And now for the other thing… a bunch of large accessories, and no small ones. No spare hands, no extra arm parts or anything like that… but you do get a blood splatter for if you tear its arm off! Or a part of your choice! I do like this idea, and is worthy of losing some accessories for this one. However, the swipe claws I would’ve liked to see something else tbh. Some more hand poses could’ve been interesting – maybe something with the fingers outstretched and the thumbs flat/backwards, for posing in a crawling pose. The dirt smash accessory I could take or leave – I think it’s a decent idea, but I just don’t like the look of this splat. 

Overall, a bit of a mediocre figure. I still love the design of it, just the execution could’ve done with some more work, as it feels kind of half-baked. I can’t really see this one going up much in the aftermarket, but I think it’s decent enough. 

EVA-01 Awakened Ver. – Evangelion

Here we have the second Evangelion I’ve bought from the Legacy of Revoltech series. 

So here he is, out of the box:

Mostly I like this guy from the front. The striking colour scheme works well, though you can see a couple of paint flaws – one on his right arm, one on the upper right part of his chest in red are visible in the photo. I find the arm transition a bit sudden – maybe it could’ve done with a paint job to blend it more. The flare on this pearly part of his arm is a bit flat too – could’ve done with more texture so it didn’t look like a plastic offshoot. 

The halo looks nice though, on reflection, I think I prefer the downwards part, rather than a less-sturdy connection method. 

Left:

The flare on his lower arm is less of a distraction than the upper one. I really think they should’ve gone for a smaller elbow joint. The clear hand looks really good though, and I like that they transitioned to a transparent part. The joint shape in his knees works well though. I like the way the shoulder parts on these figures articulate, so they don’t get in the way whilst playing/adjusting with the figure. 

Right:

Mostly loks good from this angle, but there are some shaky elements to the paint if you look closely. I like the shiny black, though I think it’s supposed to be more matte. 

Back:

Again, no subtlety to that arm transition. Here we see the hidden ball joints form the back. And the plug

hatch

alternate part designed to hold the halo – if you don’t like the halo, by default there’s a

plug

hatch part that doesn’t have the peg for the halo. Think it’s good that they included this option, as halos can usually look a bit cheesy, at the best of times. 

Face close-up:

His jaw hinges on this head, which is a cool feature. Grrowwwl. 

Halo from the side:

This clear peg part works well. 

Halo from the top:

Annoyingly, there’s a tiny paint chip on mine. Nice texture on top, though maybe less transparent than it should be to feel “halo-y”. 

Alternate head:

This head has a fixed mouth, but you can “equip” the starry eyes. They seem to stay on there reasonably firmly. 

Default plug hatch:

This was an absolute ass to take out, but does eventually come out if you keep prying! 

Extra arm:

For if you don’t want glowy action. 

Gun and charging cable:

Might get the gun out, but the charging cable would be a pain, so that’s going in the accessory bag for me. 

Hands. More hands:

I guess the arm accessory is for switching sides of the glowing arm? And plenty of hands, for all your hand-posing needs. 

And that’s your lot. Overall, the figure does feel on the cheaper side, which it is. Posing may be a bit of an issue – he does come apart at the middle rather easily for me. Posing, I had a bit of an issue getting the joints where I wanted. However, he certainly is well-represented in the accessories department, which does help make up for the QC issues. Overall, I’m OK with this figure, but not wild about it. The prices are certainly more reasonable than Figmas though, not that there is ones of these dudes. 

Deadpool – Marvel

Now for some articulated action with Amazing Yamaguchi Deadpool:

Yeah, this fellah here. I won’t be doing much articulation of him in this blog post though – am trying to catch up a bit with my bloggery. He does have some decent articulation to him though. 

Love the paintwork on the figure – the shading on his chest looks really good, and his mask is sculpted well. The ammo pouches and the gun pouch are detailed well. 

Left:

Looks OK from the side. Not too much to say here. Joint on the back of his head sticks out a bit, looking at him from the side. 

Right:

Pouches look good from this side, and he’s also got a large knife/small sword strapped to his leg on this side, as part of the figure. Imo, with the knife on his leg, the straps on his lower leg look a lot better- they look kind of odd on the other side, as there’s no paint separating them from his leg. 

Back:

Love the sheathed swords accessory. Looks good on his back, and pegs well. The straps on his forearm look good. Leg joints, whilst visible, do meld in well for me, compared to other figures. 

Accessories:

He comes with a good range of accessories – no Chimichanga though. He has a good range of hands, plus his guns and swords, if you wish for him to wield them. There is also a spare head. 

And now for what the weird red bar is for:

You can pop his eyes out, and replace them with the ones in the plastic tray. pictured above. I think this is a pretty neat idea, and gives you many head options at a cheap price. 

Overall, this is a decent, chunky figure of Deadpool, and I would recommend it. Looking at pictures of the Figma one, it does seem to be more refined than this one, but this one won’t eat at the wallet so hard. Having a brief read around the internet, it does seem to come down how much you want to spend vs the look and feel you like as to which one you get. For me, the price of the Figma was not worth it, and there’s not enough in it to make me get the Figma. And I already had the Marvel Legends large Deadpool. 

Thresher – Spawn

And now for a Spawn figure, Thresher:

I already owned the blue/red variant, but this one was ¥380… How could I turn that down? And she looks cool in both colour schemes! This one also has the advantage of being complete (as it was still sealed)… believe the claw is missing on my other one. 

Here she is without her mask:

And a close-up of her face:

She does look more diseased than speckled than the other variant, what with the grey skin and purple dots. Her makeup is nice though. 

Close-up with mask:

I love the masks for these figures, so will likely display her like this. The chest paint is a nice fade from yellow to green, though her belly is painted green rather than grey, which looks kind of odd. Looks like they designed it to be a gap in her top, but it’s not painted like that. Fairly minor for me though. 

Close-up of one her arm parts:

This is where a bunch of the attraction of this figure comes in – the number of articulated “extras” she has. I love the bio-mechanical design. The serpentine bracelet(?) on her arm looks good too.

Left:

I like the gun she has – is an interesting design, and there are some paint accents so it isn’t a fully flat silver colour. She has that “big leg” thing going on that most Spawn figures have – but I guess it does help figure stability a fair bit! The bone-coloured parts work well with the green. If I had to nitpick, the grey under her arm is eerily flat grey – could’ve done with a tad of shading in there. 

Close-up of the gun:

Plenty of sculpt detail here. The spiky claw parts help it fit thematically with the figure. She also has a knife down here, as a backup, but this part is part of the figure, so she doesn’t have one to pose her with. 

Right:

Here she wields some bio-gun and a claw launcher. I tried to pick which angle would look best for the claw, but managed to screw it up and not notice until I was writing this blog… The tube plugs in securely into the relevant holes, and as it is loose, it won’t snap if it snags on anything. 

Close-up of the claw:

The painting is really nice on this – the paints blend well. And it fires pretty good too! Pull it back, let it go, lose it on the other side of the room… 

Back:

Other holes are available, should you wish to plug the tube in elsewhere. Back looks OK, but I wish they did more with the area where the parts hinge on her back – added a bit of sculpting so that they fit in with the figure more, instead of looking like round lumps. Sculpting on the back of her clothes is nice though. 

Overall, happy to have two of her, so I can appreciate her in more than one room :). For a bargain price too! Would recommend this Spawn figure, even at less of a bargain. 

Yoko Littner – Tengen Toppa Gurren-Lagann

Managed to get my hands on an affordable Yoko figure whilst I was in Japan, of which is a rarity. The box was in poor condition (no acetate), but the figure itself was in good condition.

So here she is:

Not the best looker out of action figures, but a decent effort overall. Being scantily clad, she lends herself to action figure form more, as the articulation can be put at the edges of her clothing, which can be seen here. She does have a shiny belly, as she’s a bit rubbery. I really like the hair and the glasses on this figure. 

Left:

Here we can see the budget/older nature of this figure. The boots are a nice sculpt, but she has some noticeable seams on her leg. Also note the sticker dot – these are supplied with the figure so you can cover the screw holes. I chose to use them as the screws are pretty ugly. Her hair curves around nicely. 

Right:

Her bum sticks out awkwardly here, but that might be partly the fault of the stand. Again, seam city, and her back looks odd from the way it articulates. 

Back:

And here we can see how ugly the screws actually are. I didn’t sticker these ones, because I couldn’t be bothered, but there are enough stickers to go around, if you want to do the full job. I’d rather keep them as spares, if the ones I applied get knocked off and lost. The back view definitely isn’t winning any awards, and there are a lot of compromises to allow full articulation, such  as her legs, so she can crouch more. I think this is definitely a figure you want to pose o look at from the front, rather than any other angles. 

In terms of accessories, she has a hairpiece with no glasses, loads of hands, barefoot legs, a little Boota, an extra face, her gun, and some parts for it. 

But due to laziness, and the box being in a different room, I only took pics of her gun:

I think the gun looks pretty decent, but nothing special. The paint is neat, but simple. Matches the figure, really. 

Overall, I wouldn’t recommend this figure. Imo, this figure has its flaws, so I’d only recommend if you want everything Yoko, and/or she comes up cheap. I paid ¥2200 for her, so didn’t exactly break the bank in buying her. I don’t own it, but the Fraulein versions would likely be a better bet, and probably not too much more to buy. 

Alien Big Chap – Alien – Revoltech

I couldn’t come back from Japan without an Alien figure:

The first thing that stands out on this figure is the detail in his head and on the main part of his body. He also has some copper-coloured highlights on his body, which stand out more in-person than they do in this photo.

A closer look at that head:

The ridges are nice and pronounced, and the shading on the plastic looks really good. Not many figures have the clear plastic shaded, so a plus for this figure. 

Left:

Here we can see the highlights more, and his slender hands. I think the shading on the “back pipes” is a bit overdone, but still looks cool. I like the neutral-ish pose for his hands. 

Close-up of a hand:

The fingernails are painted well, and I like the way they’ve sculpted his tendons. The brown-to-black paint is blended well. The lines on his arms are sculpted well, and he has the pokey bit from his elbow. 

Right:

Love the shininess and the detail. The fin that pokes up above the “pipes” has a nice evenness with the parts protruding. You do rather see the ball joints in his legs quite well from this angle though. 

Closer look at the tail:

I think the texture has been replicated well for a 1/12 figure. Some colour highlight here too. Tail indeed does end with a barb. 

Back:

Everything barring the ball joints looks good back here. I think if this figure was reproduced today, they’d use smaller ball joints for the knees and ankles, so they don’t protrude so much. I could run my hand down the middle of that back though… and down his tail. 

“Pipes”:

I think the colours could have been blended better here, and made a bit darker. Looks kinda odd having the tips be such a bright colour of brown. 

And what kind of accessory would a xenomorph come with?

An egg, complete with facehugger! I really love the paint job on these two, and the amount of detail that went into the bottom of this facehugger. 

Side view:

Not too much to see here, but nice to see it isn’t totally flat, which makes it feel more natural. If you can call it natural. 

Back:

The level of detail is replicated on the back – his spine looks good, and you can see where the body goes into the “fingers” of the facehugger. The egg has a very nice green-to-black fade going on. 

Top of the egg:

The detail looks really good here too. The facehugger is a separate part, so you can display it separately if you wish, but the egg holds it sturdily despite the small connection between the two. 

Egg base:

Love the wormy, alien texture here too. The paint is also neatly done, and this is actually slightly transparent, which looks really good in person when the light goes through it. 

Overall, I’m very pleased with this figure. Would recommend to a fan of xenos, but don’t expect anything in terms of accessories – the xeno is “as-is”, plus the egg. Both are great pieces imo. 

Silver Crow – Accel World – Be@rbrick

Here is a Be@rbrick of Silver Crow:

Hi me! When I went to buy this, I had to ask at the counter for it – turns out they had just about every other Be@rbrick on display, but not this one, despite having three or more in the drawer… He was one of the specific items I was after, so was glad to get him. 

Love the shiny visor they’ve given him, and the Silver Crow design has translated reasonably well to Be@rbrick form. The lines are nice and crisp, and the design has many key features to make it recognisably Silver Crow. No wings though. 

Left:

Here we see his “power” gauntlets, and the twiddly design bits on his arm. And he’s not quite as slender as Silver Crow himself! Some nice linework gives his helmet a techno feel.

Right:

Same design here, as the left. Still definitely bear-shaped instead of Crow-shaped, but that is to be expected.

Back:

Here we have a bit of a spine decoration, and the plates where his wings would protrude from, should he deploy them. Be@rbrick isn’t in the habit of giving accessories to their bears, so this design choice makes sense. He has some detailing on the back of his legs and head, to finish off his design.

Overall, I’m happy with this Be@rbrick, especially as he was decently cheap. I feel the design was translated well, especially given the very different body types – it’s still very much recognisable as Silver Crow imo, whilst fitting to the Be@rbrick shape. A nice bit of small merch to add to the Accel World collection. 

Raven Spawn – Spawn

Ah, a Western figure for the first time in ages! I have been buying Western stuff, but this is still part of my Japan haul… so a bunch of other stuff to get through… 

So let’s have a little look at Raven Spawn:

He was sold as a loose figure, so I don’t have his base. As far as I can tell, that’s all that’s missing, barring the box. I did think that one of his hands was missing at one point, but it had just escaped and hid behind him in the bag. I’m not bothered by the missing base, as I find the bases that these figures come with way too big and ugly. They have a feature where they can spin around, but this is kind of pointless… 

From the front, I love the pose, and the brown-black-grey colour scheme works well. 

Face:

A mean-looking dude! Wouldn’t want to meet him on a dark night. His arm is sort of poseable, but not to any significant degree – he’s definitely been designed to hold his sickle aloft. 

Closer look at the sickle:

Fairly uncomplicated weapon, though mine looks like it might be a little damaged at the end there. The sculpting is pretty nice though. 

Middle:

I love this skull tucked in here – it does a good job of holding the chains, and adds detail to his armour. 

Hand & lower chain:

Mmm, spiky. I like the way this stands out from the rest of him, so his hand can be clearly seen, despite the muted colour scheme. This hand is perfect for holding the lower chain half from his body. 

Left:

Here we get to see his leather strips cape. I like the texture on it, and the texture on his boots. 

Right:

Oops, looks like I had the chain a bit twisted up here… Love the “feathered” bits on his arm and ankles – they add a fair bit to the figure. The texture on the side of his chest looks good too. 

Back:

His cape feels a bit flat form the back. I feel almost it needed more separation of the leathery strips, so you could manually add a bit of depth, but then again, this could become annoying and tangly. Overall, not a figure that the back warrants much attention, further making the spinning base that he should have come with kind of useless. 

Overall, I like this figure – the small details really makes this figure. The sculpt really helps with what could potentially be a boring figure into an interesting one. Would recommend if you’re OK with him being more of a poseable statue and like the stylised look. 

Mandarake Be@rbrick

As one of my favourite stores… I decided to buy a piece of store merch…yup. And it was the most expensive thing I bought at that Mandarake, lol. 

Presenting the Mandarake Be@rbrick:

It has the standard articulation of a Be@rbrick – ball joints for the arms and legs,and the head swivels. They had a lot of these for sale, so no shortage in supply, but at ¥1,800 they’re not cheap. However, this is the average price for the special releases, and this one does the added advantage of glowing in the dark. So you can profess your love of Mandarake at all hours of the day… Hm. 

Print on the front is well done, and is crisp. 

Left:

Yep, standard Be@rbrick thing going on here. 

Right:

Back:

Overall, it’s a very niche thing to own. So erm, you could buy one if you want one? I bought it for its randomness and the fact I like Mandarake. They’ve been helpful when I’ve needed to contact them, and I’ve been happy with the stuff I’ve purchased, so was happy to buy this too. 

Just sad that the Urban Mines no longer exist, ah well, one less place to nickel and dime my bank account to death! But seeing all the random shite was fun… as well as getting good deals now and then. 

Microman Izamu

So… this thing seems to be from the Japanese equivalent of the 80s toys that had cartoons made for them. Initially, this was a toy series that had its own backstory, which eventually got a manga and a TV series… in a similar style to some other toy lines in the West. Also part of this toyline was the inspiration and basis for Transformers! 

This part of the series, the toys were marketed as being 1:1 size and were masquerading as action figures on their visit to Earth… Old toy lines, amirite? 

So this one is called Izamu:

image

I bought him, as he was one of the cheaper ones, and I liked the gold-purple colour scheme. Some of them were pretty pricey for what they were, and I guess those were the popular characters, lol. 

Standing straight:

image

He does have a fair amount of retro toy feel going on about him, though his hinges have been incorporated well into the design, so they don’t look bad. He’s decently articulated, and has the ability to stand (which is easier, given his small size). I like the shapes of his armour pieces, making his look interesting and detailed. 

Left:

image

Here we have his arm cannon, which has a decent amount of moulding detail. The clear parts of this figure manage to look good,without overwhelming the “look” of the figure. The silver plastic isn’t the best, but hey, cheap small action figure. The sculpt detail helps make up for the lack of any detail paint, not that you’d expect a paint job on this kind of figure. 

Closeup of the gun:

I like this cross design, and the different levels used in the design to make it stand out. 

Right:

image

I like the way they’ve added a gold detail to his right arm, so it doesn’t look overly plain. Here we can see how the cannon isn’t his actual left arm, but rather attached to it (though it is a part of the figure and doesn’t remove). Here we can also see how his head being silver gives it more definition, and does look better than if it was transparent. 

Back:

image

We can see he’s fully committed to the masquerading-as-a-toy bit by the Takara stamped on his backside P. One screwhead back here – almost feels as if they missed a trick by putting it below the circular part, instead of inside. The sculptwork does go around it though, so it doesn’t look super out-of-place. Here you can see how older toys without ankle articulation are harder to balance :P. The details on the purple part of his back are really nice, and shows they thought about the back of the figure too. 

Overall, I’d recommend this line, if you’re a fan of the designs and into this retro aesthetic. The articulation is decent, and you can get a good range of poses with him imo. Better than some modern equivalents, but not the super-articulated ones (though some of the latter do suffer from being too dainty, and being awkward to pose as a result…). 

Barnaby Brooks Jr – Tiger & Bunny – Darkness Edition

Good Luck Mode Activated:

Here we have a dark version of Barnaby Brooks Jr. with Good Luck Mode leg equipped. He starts off with a normal leg attached, but couldn’t resist trying this one out. Attaching it was a mild pain, and did require reading the instructions so that I didn’t pull the leg apart at the wrong points (… I may’ve tried). 

From the front, I’m impressed with him, especially as he was around a fiver. The black gives him a more classy look, with the “old gold” colour accents. I’m not sure if the pink the transparent parts quite goes – might’ve worked better if these were a deeper red. 

Face:

The parts joint nicely, and there’s some detailing around by his neck. Love the head sculpt, tho the chest feels it lacks depth somehow. 

Left:

The paint is mostly decent, without too much deviation from the lines.  Ilike the sides of his head, and there are some details in the Good Luck Mode leg, showing the machinery behind it, which is a really nice touch. 

Right:

Yeah, that leg is simultaneously cool and ridiculous! Just like the show :). His arms look good from the sides, and the silver hands complement the scheme nicely. 

Back:

Back of the legs aren’t hugely detailed imo, and serve just to “complete” the figure. The boosters are nice, and include the inner details, which show through the transparent parts well. He has some nice details on the underside of his arms that I like. 

Leg:

It does a good job of looking like the extended version of his default leg. The copper “spine” works well, giving the feeling of that’s where all the parts attach to. Yep, I wouldn’t want that thing heading towards me at high speed!

Accessories:

Not too much to speak about here. A couple of arms, and his default leg, plus a shut mask. So if you’re looking for customisabilty, this figure doesn’t really offer it, though I’m not sure what much else he would come with – he doesn’t do much of a line in weaponry. That’s more Wild Tiger’s thing… 

Overall, I think this is a decent figure, especially for the price you can get this one for. I think he could do with a decal on the white part of his chest – on the normal versions he has a little bunny logo – incorporating that would’ve helped break up the chest area a bit. I can see this being a bit of a Marmite figure – he’s decent for what he is, but I feel he a very niche appeal. Though if you do like him, you should be able to get him for a good price.

Rei Ayanami – Evangelion – Fraulein 001

This has been a Rei figure I’ve been thinking of getting on and off, finally grabbed it whilst I was in Japan and could get it for cheap:

I like the details in this figure – she’s well-sculpted and painted, and the Lance of Longinus is a lovely shiny red. My main complaint is the way they’ve done the stand – she doesn’t stand easily on her own, but she has a habit of looking like she’s been strung up, thanks to the stand being longer than her legs. I guess it’d be possible to give her an action pose, but I’ll likely just ignore the hung-up look or give her some kind of action pose. She seems to hold the Lance OK, though again it’s a bit of fun to pose. 

Left:

Here you can see how the stand works, and there isn’t a way of getting it so she looks comfortable. It would’ve been nice if the stand had a couple of rods, so you could decide her height. Part of me feels like butchering the stand, just so she isn’t floating. Her hair has some shading to it, and she looks well-painted from the side. Her leg will look gappy if you pose it though.

Right:

More of the same. The shapes on her suit feel accurate to her design, and the painting is good.

Back:

She has some nice, sweeping lines in her hair, and her backpack looks good. Legs are a bit segmenty from the articulation though. 

Overall this is an OK Rei figure – I don’t regard it as anything special, but she’s still a solid figure imo. Has a distinct downside in the way her stand works, but I think she looks decent for an articulated figure.