Tag: eastern figures

Accel World – Toy’s Works Collection… the other one

Finally ordered the other set of figures… but as separate lots, as it was cheaper than ordering the 5 as a set at Suruga-ya. Go figure. It was just these 5 mini-figures, just to see if Suruga-ya had small boxes. And the answer was… kind of. The box fit into small packet, so I didn’t have to pay for repackaging, but man, they were overpacked:

So yeah…. probably worse than AmiAmi. Probably doesn’t make much odds domestically for the shipping cost, and the domestic shipping is free when you spend over ¥1,500, so it mostly costs me the repackaging fee. 

First of the figures we have is Black Lotus:

It’s an OK figure, but I prefer the Dengeki one, as that one a bit better and a more matte plastic. Plus the Dengeki one has the purple parts in her head “fins”. 

Side:

Back:

Overall the sculpt seems good. I haven’t straightened out the pointy bits, but the box does advise heating these in water and straightening them. They’re not too bad on this one, so haven’t tried fixing them up. 

Harayuki with food:

I love this cute Haruyuki Arita. The paint is really well done on Arita, pancakes are slightly on the sloppy side, but not really noticeably so for me. Love the stars in his eyes… he must be happy to have a whole stack of pancakes to himself!

Arita playing squash:

Another iconic activity of Arita’s. Love the little eyebrows, conveying concentration. I really like these Aritas, as he’s depicted doing two of his most iconic activities – eating and playing squash. Really fits with the character, and gives him more accessories than all the other little avatar-Aritas I have. 

Scarlet Rain, with gun:

The one thing I really like about the Scarlet Rain figures – they have a bit more articulation than the others, and you can move her arms and head pieces around. However, the finish on her head on both figures I received is a bit rough. Not sure if this is an issue peculiar to mine, or a problem with the manufacture. She’s lovely and shiny though, and the colours stand out well. Kinda sad that they didn’t put the wires into the figure, that they had on the box art – she usually has two wires coming from her back, or can do. 

Scarlet Rain in grump-mode:

Yep, this is the Red King we know and love :). Again, this one has the funny finish on her head. There isn’t a huge amount to differentiate between these two Scarlet Rain figures, but with the poseable parts, it is possible to make them look sufficiently different. 

Overall, I’m happy with this set, and my favourite figures out of this set are the Aritas. If it weren’t for the oddity of the finish on the Scarlet Rain figures, I’d probably like them a lot more. I paid £4.20 each (with shipping factored in), which is around about the asking price for these kinds of small figures. If you can pick them up for a few quid each, and are an Accel World fan, I’d definitely recommend the Aritas, and possibly the Scarlet Rains… or maybe whichever’s your favourite. The Black Lotus… I prefer the Dengeki one, though this one was half the cost. So if you were to get one, I’d recommend the Dengeki one, unless you want this set, or you don’t want to spend more on the Dengeki one (if you can find it…). 

Asuna – Noodle Stopper – Sword Art Online

Upon arriving home from my travels, I had this figure to unbox:

Asuna, from Sword Art Online, in noodle-stopping form. Or more like a shelf-edge figure… not sure how many people are actually going to use these figures to keep the steam in their Cup-o-Noodles. Initially I wasn’t going to get either of the SAO noodle stoppers, but upon seeing this one, I decided to order her, and I’m glad I did. FuRyu have done a really good job with her!

Front:

Her feet seem really detailed, with her toes. She also has a good amount of shading in her hair, which not all of these figures do. Most of the red lines are pretty neat, a bit wobbly on her left hand boob, but nowhere as bad as the initial pics implied it could be. She has a good amount of definition around her stomach and neck/collar area. 

I love the expression on her face, and her face has been well-painted. No complaints here from me. 

Left:

Here we can see the cross detail on her swimsuit top, which has been crisply done. Her hairstyle has been well-recreated, with her plaits and mini-ponytail. Love the way they have her ear sticking out, and the towel over her lap looks good. 

Right:

The large bow looks really good, along with the one on the back of her swimsuit top. She also has well-defined shoulderblades. The cuff around her wrist has been painted well. 

Back:

Here’s the back of her, which does a look a bit prize-figure-y in sculpt, but the shading is really nice. She rests well on a flat surface, with her backside, hair and hand. Left arm looks a little funny on the join,but tbh, it’s a minor complaint. 

Overall, I really like this figure, especially for the price I paid. I’d recommend this figure to anyone who’d like a figure of Asuna to perch on the edge of a shelf or similar location. Mine currently sits on the edge of the vivarium :). 

Devilman Keyrings

I had some promotional credit from a proxy service that I wanted to try out, so decided to go for a cheap item. I found these Banpresto Devilman keyrings on a “Buy it now”, and decided they were a good option. 

The proxying worked fine, with no issues, so that was good. 

Firstly we have this small Devilman keyring, that was already on one of my keyring display bars:

He was the smallest of the three keyrings, and of a decent quality.

Next up, a larger version of Devilman’s movie appearance:

With the larger size, there’s a lot more detail in the sculpt and the paintwork. I prefer the expression on the other keyring though. 

Devilman in his original cartoon form:

The sculpt isn’t hugely detailed, but gets the Devilman feel across. Logo on his belt is a bit squiffy. but his face is nicely rendered. Not sure if I’ll put this one on display, but it’s nice to have it. Might as well have one figure in his original appearance :P. 

Overall I’m happy I went for these keyrings. 

EVA-13 – Revoltech

Initially I missed the re-release of this figure, but then randomly found it in stock again on AmiAmi. Wasting no time, I ordered it – stuff like this doesn’t tend to stay in stock for long with AmiAmi if it comes back into the store. 

Here he is in his “default” configuration:

Decided to equip him with both the lances, so most of the shots will feature these. Other options available, and will be shown later in this review. 

I love the shiny purple paint, and the yellow & green that complements it. He also articulates well imo, and his midriff segments bend pleasingly. I prefer a more stoic pose though. 

Left:

Here he is… having a bit of a nap apparently. The paint is nice and striking, but a wee bit uneven in spots. Not really noticeable from the distance I’m taking photos at. 

Right:

Closer look. Here you can see a bit of a paint flaw, in the black paint on his upper arm, where it spills into the green stripe near his elbow. And a bit of an uneven line going into the canary yellow. Whilst the paint job is mildly iffy in places, the articulation seems plentiful, and feels good. 

Close-up of the head:

Paint job  is OK; like all the little details in the mould. And ofc, you’ve got that wonderful impaling spike on his head :D. 

Back:

Some nice painting and moulding on his back – love the silver bits running down the middle. 

Here are the other spare parts, not shown in the rest of this review:

Plenty of hands to choose from, if you don’t want him wielding the spears of destiny. Also has the gun, if you wish to go for a less epic weapon. 

Also in accessories is the AT field:

That sits on an arm…:

…which can be attached to the stand. Then you need to balance EVA-13 up on his own, which he will do. Though I’d prefer to have a separate stand, tbh. 

And after taking this pic, I realised I was some parts short. So I went to dig up the other bag of spare parts, and assemble him in the configuration I really wanted him in:

Yeah, much better! This form consists of a new upper torso and two more arms. The uppermost purple V in his chest is rubbery, and sits above the joint that attaches into the grey part of his torso. With the extra arms, the spears are far more stable, so now I can have him hold them aloft, and not worry about them swinging out of place, like with two arms. 

Some more views:

Looking good :).

Close-up of the arms:

Love the shiny silver, and the cuff that both the lower arms have. Does make assembling on his lower hands a little on the awkward side. 

Overall, I really like this dude. He’s probably not as good as a Figma, but he comes at a lower price point, and far more accessories. Really happy to have him, and will be getting more of the Evangelion Evolution re-releases. I won’t be getting all of them – just a select few. 

Dva – Native

This figure is a futanari figure, so this is definitely a NSFW blog.

So let’s start with a SFW pic:

image

She has a very cute face, that has been well-painted. Love the shading underneath her fringe, and the slight smile. 

Here’s the “company is coming around” configuration:

image

The pasties covering her nipples are made out of metal, and she has magnets in her boobs. This makes them stay put, yet be easy to take off and put on. I like this! This figure benefits from strong lighting – her skin is quite plain, as far as paint jobs go, but in the light, it adds a fair amount of natural shadow, as seein in the pic. I love the shiny purple of her ribbons, and the methods used to hide the figure’s seamlines. 

Dva’s base:

This thing is big. Takes up most of a shelf of a detolf cabinet… The texture’s nice, and the butt divot does help keep her in place, but there’s no shading in the paint. Fortunately Dva mostly covers it, so it isn’t too much of an eyesore. And she certainly is a distraction, lol. 

Close-up of her with the pasties:

The paint appears to be thickly applied, and is a good, solid layer. Also shiny, which makes them nice, if you’d like to display her with them. 

Here she is without her pasties:

Yep, those look like a pair of nipples on a couple o’ melons. They’re big, but somehow don’t look ridiculous like some anime figures can do. 

Close-up on the flower in her hair:

Nice, vibrant colours, that contrast well with her hair. 

Let’s look at her different downstairs options, before looking at the rest of her in detail.

First up, if you want to keep her 100% woman:

Just the string, with some well-sculpted inner female parts. Not sure if she has a labia majora? 

If you want her to be futanari but not have everything on show:

You get this option, where she has a bright blue condom. The condom has a moulded ridge at the bottom, so it doesn’t appear painted on, which I thought was a nice touch. 

And for the full futanari effect:

One member please! It does have a particularly dark tip to it, which is a bit odd, but I honestly don’t mind it. Is a bit of an odd choice, but hey. Does ensure it contrasts strongly with her body and doesn’t blend in with it, from a front-on view. 

With this part, there is a labia minora visible underneath:

S’cuse the blurry shot. Was trying to hold her and focus the camera at the same time… maybe I should’ve taken the part off first. But I think this shot gets across what’s there, though it really isn’t visible when she’s on display. 

Close-up of her left leg:

I love the purple bows – the shiny purple is a lovely colour. The bottom part of her leg detaches, so you can slip the golden ring onto her ankle. The golden rings are packed separately in the box, so no need to worry about paint transfer. 

Right leg:

One nicely sculpted leg. Not much to say about this one. Some suggestions of shading in the paint, but not a lot. 

Midsection:

Yeah, this shot for your work PC wallpaper :P. The strings are nicely moulded, and slightly dig into her flesh. Hate it when they overdo it with the tightness, but I think this is a nice balance. The gold rings are also painted well, without stray paint. 

Left:

Here we can see she is arching her back slightly. Nothing too strenuous. The ribbon on her leg hangs down nicely. 

Close-up of her side:

The black strings are neatly painted. 

Right:

Here we can see where she’s resting her hand behind her, and the subtle shading in her hair. 

Close-up of her arm:

The band is nicely placed on her arm, and here is the other bangle you can place on her, if you’d like. Her lower arm detaches, so you can slip this on easily. Some people have complained her hand doesn’t lean on the base, but for mine, it does to some extent, and looks fine from the front. 

Close-up of the bangle:

Shiny 🙂 Here you can see where her hand does touch a bit to one side, but not so much in the middle. 

Back:

Yeah, bit of a seam visible here, but I love the gradient in her hair. And a nice shot of the penis :P. 

Lastly, here’s a shot of one of the penises not attached:

This peg simply plugs into the front of her, and the pieces stay there snugly. The penises are easy to remove, but the female parts are a bit of a pain to get out. Was able to do it with a fingernail from the bottom point. Once you’ve loosened them a bit, they’re easy to pull out. With the snug fit though, it does make the thong/genitalia parts look seamless though, which is good. 


This was an expensive figure, and an even more expensive one to get in the aftermarket. Glad I decided to be decisive about my preorder (had to do it through a third party too as Native won’t ship to my country :/), so I was able to get her at a more reasonable price. I think it would’ve been nice to have a bit more shading on her skin, but in the right light, she looks amazing. If you like a chick with a dick ;). though the options to display her without are both viable. 

Compiler – Story Image Figure – Yamato

I’m a sucker for StoryImageFigures if I see them cheaply enough. And this was the case with this one, at €5. 

So here she is:

I love the swimsuit she is wearing, and wish I could look good wearing one like that, but alas, it’d look odd on me. Not to mention that ring is probably metal and I have a nickel allergy… As an older figure, there’s a noticeable lack of dfetail in her face and hair. Some of the StoryImageFigures haven’t aged too well due to this, but on this one it isn’t enough to put me off it. The contrasting textures of her body and her swimsuit is nice.

Left:

She’s got a good pose, with one hand on her hip. Hair has some shading, They have gone for a poofy hair look, but it didn’t quite work in the mould I think. Just something about it seems to say “low detail”. 

Right:

This angle looks OK. Hair shading a bit suspect towards the top. Is a hair seam, but I don’t find it distracting. 

Back:

You can see where they’ve aimed to shade her hair, with the darkest parts on the ridges. Which I think worked. Just maybe needed to persist to the top. 

The stand is simplistic, but OK. Helps her stand up just fine, but the texture isn’t anything to write home about. She didn’t quite want to stand up originally – I think some bending has occurred in the box, but once I got her to settle, she’s been fine. 

A good addition to my collection, and was easy to place on a shelf, with a couple of other StoryImageFigures. Nice to get the odd small thing, now that I have a sizeable collection XD. 

Lilith – Darkstalkers – Capcom Girls Collection

This figure was also an instabuy for me – and even better, this one was on sale! After leaving the shop, at first I though there was damage to the wings, but it turns out I was mixing up the lugs with her claws. Was super-pleased to find out that there’s nothing wrong with her, and she was just reduced for quick sale. 

Here she is, blowing a kiss:

image

Pic towards her face:

I like the sassy pose she has – it suits her character. Her outfit isn’t overly detailed, but it does the job. The bats on her leggings are nicely done, but I would’ve liked to see a bit more contrast so they stand out more. They do blend too well into her leggings.

Close-up of her face:

A cute, if simple, face. Hair strand moulding is nice, and the creases on her sleeve. 

Opposite side:

Here we can see she is well-posed, with one leg bent in a suggesive pose. We can also see where i didn’t quite get the pegs all the way in. Didn’t want to end up breaking them, so ended up leaving them as-is for now. Back of her head is largely flat, which doesn’t make it very hairlike. Other part that doesn’t look so good imo is the white edging on her sleeves – the finish and colour leaves it looking plasticy, instead of more like fabric. 

Back:

One well-sculpted butt :). Her spine and back are detailed in the sculpt, which is nice. 

Close-up of the wing:

No shading, but I think they still look good and striking. Due to their shape, natural light adds some natural shading :). I like the way they’re posed so they frame her. The tops of her wings aren’t detailed, but I don’t see too much of them. 

Overall, I like this figure. It is a simpler figure aimed at a lower price point. If you can pick her up for a good price, I’d recommend her. 

Wasp – Kotobukiya Bishoujo

The day before I went to FACTS, I went to a handful of comic book shops and Japanese merch shops in Belgium.

First purchase was Wasp from Super Dragon Toys, as she was on sale. Had seen her clearance in the UK, but didn’t get her as I wasn’t sure if I liked her. Seeing her in person made me decide I wanted her. So here she is:

image

I love the happy expression, and the shiny wings. The gold has also beeen superbly done – gold can often look poor on figures, but here, it’s a good hue and shiny. 

Close-up of her face:

image

Love the shiny lipstick and moulded mouth. She’s also got some shading painted into her eyes, which is a nice touch. Her hair is sort of simple, but nicely sculpted. Here we can also see a couple of creases moulded into the neck part of her suit, giving it a lifelike appearance.

Close-up of the base:

image

A nice, creative base. No solid-coloured disc here. The splash looks good, with the blue fading out towards the droplets. Also some ripples on the disc part of the base, so it isn’t just flat. The colour complements the figure imo.

Right:

image

Here we see the bulk of her outfit – I love the gold piece running down the middle, and the gold on her palms. The suit itself also has a few well-placed creases, to show it is indeed a bodysuit. 

Left:

image

Here we can see where the wings peg into her back, and the paints nicely match up. And her shapely backside – she has a pear shape goin’ on here. 

Close-up of the gold on her shoes:

image

I don’t think she has much grip on the floor, but the finish is nice and gold colour attractive. 

Back:

image

This shot shows off some of the iridescence of the wings. I love that they’ve managed to make the wings iridescent – it shines quite well, and looks great in the sunlight. 

Her hair looks good from the back too. 

Close-up of the wings:

image

This is definitely one of the features that attracted me to buying this figure. More figures need iridescent parts! And well-done gold parts! 

Overall, I really like this figure, and kind of wish I bought it sooner XD. Might’ve got it for a bit cheaper, but hey, I have her now!

Liko – Active Raid – Figure-Rise Bust

I saw a video of this model kit, and decided I would like it, to continue on with my interest in all things model kit. I’m not familiar with the series, but loved the colour scheme, and thought she was cute. So here she is:

Not the easiest thing to take a picture of, due to her outstretched arm. And those dot stickers on her collar were in the right place when I built it *goes to fix it*. 

With this kit, the things that attracted me to it was the face, the base and the colour scheme. I love the way they have done injection moulding for her eyes – they’re actually constructed from plastic, rather than being stickers, which gives them a fantastic finish. And no need to worry about getting them crooked! My main issue with the kit was getting the flesh-coloured parts of her body to sit well together – here you can see the bit at the front is still a bit gappy. Other problem was the stickers – some of them didn’t quite seem big enough – main pain-in-the-backside are the ones above her chest – those V-shaped stickers seemed too small for the space they fit in. 

Left:

Here you can see some of the details on her sleeves, which are nice. Here you can see one of her body seams – they’re just kind of butt-ugly. She looks fine from the front, but the seams kinda make other angles a bit “eh”. Her hair flows nicely though,and I like the frill she has on her headband. Maybe I could go for a partial disassemble and sand down those bits of the sprue, but not sure it’s entirely worth it. 

Right side:

Another weird seam here. I do like the way she “projects” out of the base. Another interesting thing about this base is you can attach it to a Bandai stand, along with the mecha that goes with her. Probably won’t get the mecha though. 

Back:

Here we can see her flowing hair, which I think looks good. 

Top back:

A closer look at those unusually-shaped hair buns, which give some personality to the figure. You can also rotate them, to get her micro-pigtails at whatever angle is preferable to you. 

Bottom of the back of the base:

Here we can see how she is hollow and attaches to the stand. Getting the disc into the correct orientation was… fun. There wasn’t much guidance of how it was supposed to go, but some trial and error later, I got it. She attaches firmly to the stand, so not concerned about her dropping off or anything. The way her hair connects to the stand means her head does not articulate though. 

Above:

I love her sleeve. All of the translucent green pieces have silver stickers underneath, which help the green bits “pop”, which adds to the figure. Her arm at the white armband is a bit easy to knock apart though. Did knock her arm off mid-assembly, oops. 

Overall, I like this model kit. It wasn’t too hard to assemble, but I don’t think I would’ve paid a lot for it. If you find this cheap, and like the end result, I could recommend it, but kind of has limited display angles, due to the way the seams are, unless you really want to get some model putty and paint out. 

Kuroyukihime & Arita Haruyuki – Banpresto

I saw these appear on an Urban Mine auction some time ago, but I believe that they went for more than I wanted to pay for them.

Then I was just browsing Mandarake randomly – and found they were in the store! And for the grand sum of ¥100! I quickly put a Mandarake order together for these two, and they arrived some time later. 

So here they are:

image

Yay! A cute pair of prize figures. Arita’s avatar form isn’t much to look at, but it has been nicely painted. Kuroyukihime in avatar form though… is nicely detailed and well-painted. Definitely worthy of a B-Prize. Kuroyukihime’s base has her name on, and does have some of a design, but it’s mostly covered up by her dress. I like the way Arita’s base has a curly pink tail on it, and he sits in the middle, but it would’ve been nice to have his name on the base, to match Kuroyukihime’s. 

Left:

image

Here we can see Kuroyukihime’s wings, which have been well reproduced in chibi-form. She has two pegs on her feet and this head stand, so she is stable. The dress is a nice texture, but her hair is on the shiny side. We can also see Arita’s cute, curly tail. 

Right:

Nice amount of strands in her hair on this side, helping it not look flat, though the top of the hair is standard for this kind of chibi figure. 

Back:

Here we can see more of the wings, which have been very nicely done. The paint and detailing is good. The dress also looks really nice, with the purple trim and the folded fabric. Not much to see with Arita, not that anything is really expected. His ears are shaped nicely though. 

Super-pleased with this set. I don’t usually go for these small chibi figures, but I really like this pair. Her hair does suffer from prize-figure shininess, but the rest of her is really well done. Glad I picked these up, especially for the cheap price! 

And just before I finish this blog, a quick addition:

I also bought these with this Mandarake order, but they’re not really worthy of their own blog post XD. Been on the fence about ordering them for some time, but decided to go for it. They’re a nice addition to one of my keychain rails. I think they look better than I was expecting, but I don’t think they’ll be a “favourite thing”. Still happy to get Evangelion loot though :D. 

Illusionless Time Dragonbound, Myr

After receiving the previous Myr, I decided I need more Myr. So… more Myr!

The simpleness of the dress with the small details make this a striking figre. She’s supposed to be motioning to her backdrop… but this was in her box at the time of taking pictures. I love her expression and the orange ribbons on her dress. And one feature prize figures frequently don’t have: shading in her hair! 

Close-up of her face:

Some lovely, small details in her bows and lipstick. I like her blue eyes too. Hair lacks the definition a scale would usually have, but the shading makes it look the part. The horns also have eye-catching shapes, as well as being shiny. 

Here she is, more angled on the stand:

I think she is designed to be displayed at roughly this angle. but not so good for photographs to show her details. The lower half of her dress flows well over the empty part of the stand, and definitely looks like it was designed to be seen at this angle. I like the way there are cuts in the side of the dress, so you can see some of her, and her lithe body. It is a pretty outfit. The range of finishes on this figure work really well too. 

Let’s take a closer look at that staff:

Tiny scratch on mine. Mostly looks the part, but close up, you can see how flat it is – not sure it’s really like this in the artwork, so I suspect they flattened it for the sake of quality – making it rounded would be prone to more flaws, as well as being more difficult to manufacture. From a distance, it looks fine. 

Left side:

Here we can see her revealed skin. Some amount of detail has gone into sculpting her hand. Her tail looks good, and the lines painted well on the ribbon that’s on there. Love the amount of detail that’s gone into the ribbon and cloth “boot” she’s wearing on this side.Also you can see her ear poking out from her hair, which is a nice detail.

Right side:

Here, she’s less revealed. You can see the seams in the dress,the upper one is pretty neatly done, the lower one about average. I think she’s saying “that camera? I’m gonna destroy it if you keep pointing it at me…”. Uh, please don’t, I’m nearly through with this review, I swear!

Back:

The ripples on the dress are continued around to the back. Her wings are nicely detailed on the back, and catch the light well. Here you can see where her hair is darker towards the bottom – nice that they continued the shading all the way around. 

Let’s get a closer look at those horns and wings:

Some paint shading in the horns, which is a nice touch. And those wings are looking small but amazing. 

So… what if we don’t want a great big massive stand in her back?

Erm, er well…. Not too attractive! But we can get a better look at her tail like this. I find it interesting they’ve joined the tail far higher up than most creatures have a tail. We can also admire the neat painting they’ve done  on her tail ribbon. It’s kind of a shame they went for a back stand, as she looks really good from this angle too – would’ve been nicer to have a stand that maybe went under her dress or a clear claw stand. Foot pegs may’ve worked, but even if they were clear, she probably wouldn’t look like she was floating, which is the look they were going for. Ah well, can’t have everything.

Also she doesn’t work too well without a stand from the front:

You can lean her so she stands, but she’s looking down. You could get away with doing this, if you displayed her on a high-up shelf, but really she’s designed to be displayed with the stand. 

Really pleased with this figure – Eikoh has done a really good job with it. Would recommend it if you like what you see. 

Figure Spotlight – Naked Jehuty

This figure was a birthday present from my husband, though it took the form of pointing him at the direction of the auction and having him buy it. Iirc it was on eBay as Buy-It-Now. When my birthday rolled around, this fella came out:

image

Originally I didn’t think he came with a stand, but I had a spare Play Arts Kai one, from a figure that could stand up fine on its own (a rarity with PAK!). Later, I got a second Revoltech figure, and found the stand taped to the back of the plastic. I then went up into the loft to retrieve the box, and indeed Jehuty did have a stand! Though I never switched to it, as the Revoltech stands aren’t very good, and this figure especially would pull it over. 

Here’s his back, with the shiny gold plating:

image

Here’s his side, showing his arm and face:

image

And a shot of his other side, showing the cable coming from him, and some of the detail on the back of his leg:

image

I love the colour scheme on this figure, and I have a thing for this kind of mecha. I did watch ZOE, Dolores, I but this dude doesn’t feature in it. I did enjoy it somewhat, but it isn’t a firm favourite. 

Still love this figure, maybe one day I’ll go hunt a playthrough of the game, so I can watch and learn more about the characters. 

Figure Spotlight: Figma Silver Crow

To complete the three “larger” Silver Crow figures that exist, here is Figma Silver Crow:

He has an extra-tall stand, which is great for displaying him. I love the lithe body on this silver crow, and Figma excel at the thinner body types imo. His wings look nice too, but I’ve always had a problem with one wing getting it to stay in good places, and it has always had a habit of dropping down. The second one has got a bit worse over time. It’s a bit of a shame, because he looks really good with his wings posed properly, but if he’s statically placed, you can use some putty to support the wings in place. Here, I managed to get them to stay in the positions shown. 

Left side:

Looks good. His knee joints are rather visible, which will likely put some people off. 

Right side:

Here it seems I went for a non-charged gauntlet… showing his other forearm accessory choice. Both look good. 

Back:

Some nice scuplting on his upper back. Here you can see the pegs which have the hinge in, for the wings. The weight of the wings has a tendency to pull them down. Might be possible to add a layer of polish on the pegs, to prevent them slipping down. There are some metal covers which partially hide the hinges. 

Close-up of a wing:

Nice and silvery :). Only downside of these is seeing the S. H. Figurarts and admiring the effect they achieved on those. 

There are some transparent “charge” effects you can put on his arms, but these kept falling off All. The. Time. so they went back into storage, and I couldn’t be bothered with the fiddling to get them back onto his arms for the photo shoot.. sorry. Definitely one of the downsides to this figure. Overall, the base figure is very nice though, and I would recommend this one for anyone who wants a Silver Crow figure. 

Silver Crow – S. H Figuarts

So… more Crow! This time we have the S. H. Figuarts version, so not much assembly here!

He’s noticeably darker than all the other Silver Crow figures I have. His wings are set into a transparent layer of plastic though, which can give them a “floating plate” look from certain angles. I really dig this effect. 

Close-up of one of those wings:

Here you can see the shininess from the plastic coat on the wing. Also you can see the joint mechanism – this articulates well, and is definitely one of the strengths of this figure. 

Left side:

Here you can see the “floating plate” look. Yeah, I didn’t do good in posing this for the photo shoot… his hand is looking a bit broken :P. The details on his arms are good, and he looks streamlined from the side. No complaints here.

Right side:

Here we can see the “charged” arm piece. Looks OK from this distance, but looks a bit “cheapy” close-up. He has a hand replacement for the “full” blast, but I wasn’t a big fan of that, so have left his “chopping”  hand on. 

Back:

Back details are OK. Nothing much to comment on here. Stand goes in firmly, and holds him well. 

Close-up of the arm blast:

A little bit messy in the middle, and the blue semintranslucent stuff looks a bit iffy. 

“Charged” arm on the other side:

Grasping hand looks good, and this forearm looks better than the other imo. But I’m a sucker for the charge effect. 

Overall, I like him, but wish he were paler like the other figures. His midriff looks a little odd-shaped, and could’ve done with better matching in the sculpt with the other bits, but suspect this may’ve been done to assist with articulation. If I could have his wings on another Silver Crow, I’d really like that. If you like his appearance, I can recommend this figure, but I don’t think his overall look is nicer than the others. 

Silver Crow – Bandai Figure Rise 6 Model Kit

I ordered this from Suruga-ya… then found I could’ve got it cheaper on Mandarake. Not sure if it was in stock when I first looked. However, I got this for around the same price as the Black Lotus kit, so I don’t feel like I overpaid. 

Here’s the completed Crow:

I do like the look of this Silver Crow. The silver stickers also worked better than I expected, which is a nice touch. The wings do have some plastic flaws in them from the moulding process though. 

Close-up of his face:

His mask is almost a bit too see-through, so you can see he doesn’t have a face. The green bits on his shoulders are stickers, along with anything silver. 

Left:

Though viewing his mask from the side is pretty cool – does look like there’s a head in there from this distance. The wings aren’t poseable sadly, so they’re stuck at this angle, if you equip them. There is the option to display him without them, though, if you prefer. I think the angle is a good choice, so not overly bothered by the lack of movement within the wings. 

Right:

Here I have the blast arm parts equipped – I think these look good. The upper arm needs to be specially constructed, but the lower part simply fits onto her hand. 

From the back:

His back looks good, but his wings… have plastic-saving holes. Would’ve been nice if this part was flat, or had a part to clip onto the back of the wings to cover it up. 

Here’s Silver Crow’s arm in combat mode, without the blast: 

Looks pretty cool and bulky. 

Close-up of the arm with the blast:

The blast replaces the “forked” parts of the bracer. 

Overall, I’m pleased with the result of this kit. He’s decently poseable, but the clip part that allows him to stand on the stand could do with being a fraction taller – he just about stands with this, but it’s a bit of a squeeze. If you don’t want him standing, then you have a few more options I feel. 

Black Lotus – Bandai Figure-Rise 6 Model Kit

Now for the first model kit I constructed. I have done these model kits in the opposite order, as I have some more Accel World goodies coming up.

So, here she is:

In her black, kind-of-annoying-to-photograph form! She wasn’t too bad to build – main annoyance was ensuring I was building the parts for combat mode instead of “normal” mode. Near the beginning I made a mistake, but I was able to rectify it pretty easily. She’s not really swappable between forms – you have to pick one or the other when building. Seeing as I prefer combat mode, I went for that one. Gotta have moar purple and longer swords!

Left side:

The blasts hold reasonably well. They simply wedge onto her blades. Bottom ones can come loose if she gets nudged. The blocks on the back of her legs have two ways they can sit, to show and hide the purple parts. The purple protrusions from her head have black stickers on them, to make them purple and black, and that came out well. 

Right side:

I do like the way the arms came out – they’re really cool. 

Back:

Some lovely lininess going on. The purple part on her skirt was the bit I missed at the beginning – ended up putting in the “normal” mode one, then realising it wasn’t “plug n play”, and I had to pick during construction. 

She also comes with some landing “splash” effects, if you want to pose her, as if she’s coming in to land:

Imo, they look pretty cool, and love the fact they included them:

Here’s a close-up of her head:

In which you can see the three stickers adhered to the fins on her helmet, to make them appear as they do. 

Close-up of her upper half:

I like the shininess of the stickers provided – they really add to the figure, though I balls’d up the gem in the middle a bit. She also has some extra purple plastic accents on her arms and shoulders here, for the combat mode. 

Am really happy with the finished result. She’s articulated quite well too, so you can do all sorts of posing with her too. Is quite cool, building your own articulated kit. Certainly happy with this kit, and will be building more Figure Rise 6 kits in future. 

Rider – Fate/Zero

In my Suruga-ya order, I had two Rider figures. 

First one one is a chibi-style figure by Taito:

The paintwork is nice on this one, and she’s OK for a chibi.

Side shot:

Knife-onna-spike looks nice, hair seam, kinda average.

Back:

Some sculpting to convince us that she has hair. 

Now for a trading figure by GSC:

This one is really nice, but she hasn’t had the easiest life. There is a few marks on her. Thought I ordered the masked version, but looking back at my order… I didn’t. Oops. Her colours are represented well in this figure, and there’s some nice details in the moulding – with the secions on her boot, and the wrinkles in her clothes. Her face is nicely painted too. 

Back:

Some lovely shades going on in her hair, plus detail in the way it has been represented as strands. Her dagger has been well-sculpted, and looks nice. Really pleased with this figure, despite it being her non-blindfolded version. 

Accel World – Kuroyukihime

This is an “odds n’ sods” blog of two items. First up, we have a keyring of Kuroyukime:

She’s in her school avatar outfit, which has been rendered nicely in a simplified form. She was added to a Mandarake order, to fill it up to the customs threshold. Glad I added her. 

And another Kuroyukihime in figure form:

This one was in my Suruga-ya order, because she was cute and pouty :P. 

From the side:

Bit of mould markings. The arm with the shirt was a pain – it didn’t want to stay in. Finally got it in and staying though.

Back:

Her hair looks OK for a trading figure. She was pretty much order filler, but she’ll find a space among some of my other trading figures. The paintwork is OK, but she’s nothing special. 

And that’s my random bits featuring Kuroyukihime :). And I think I’ve finally learned to spell her name, with English letters at least.

Toy’s Works Collection – Accel World

This set of figures I came across on Suruga-ya, and had to buy. There are two Toy’s Works sets for Accel World, but the other one was more expensive, and this one I actually wanted more, as it has characters I don’t have in figure form. 

Let’s start with Ash Roller, stalking into battle:

The paintwork is pretty decent on these, Love the red and yellow flames.

Here’s a second Ash Roller, who is supposed to be giving a thumbs-up:

His thumb is pointing towards the camera, as I accidentally had his arm tilted down a bit. 

Side shot showing the flame pattern on his leg, and white-flame skull:

Back:

Nice pair of Ash Roller figures. Wish this guy had a scale/prize figure, especially as he’s one of the iconic characters. 

Now for Ash Roller’s nemesis/friend, without wings:

The shiny silver paint has been done really well, and all the armour details seem to be there. Lovely, cute figure.

And here he is with his wings deployed:

Love the flying sideways pose. And his visor is shiny enough to see me in it :P. Love this figure too. 

Lastly, Cyan Pile:

Looking menacing with his pile driver. Here’s the side of it:

And his other side:

And his back:

Nice fan detail on the back of his driver, plus lots of little details in his armour.

These small figures are very nicely done. Really glad I got these, the quality of these is good, which is great for a series that doesn’t really get a lot of figures for most of its characters (wouldn’t expect the cameos to get them, but nothing for Ash Roller? Pfft). They aren’t what I’d class as poseable (mostly just head movement), but I don’t think they really need to be, as the poses are pretty cool. 

Caster – Banpresto DXF figure

This is Giles de Rais, who was the caster in Fate/Zero:

And most of the reason I did a forwarded order from Suruga-ya. And man, I shouldn’t have been ignoring this guy – he’s a really nice figure, and heavy! The paintwork on this figure is really nice, and the details are good. My main gripe is that his underskirt isn’t recessed, so the colour change on his robe looks odd. At first I wasn’t sure why it was like that, but looking up pictures of him, his robe is formed of two layers, one darker than the other. 

Here is a close-up of the marks on his arm:

The lines have been nicely done, and do look like he’s carved them into his arm. The shading is really nice on his hand, the rings look good when you’re facing him, but here you can see where they chickened out of painting them between his fingers. 

Close-up of his face:

Yep, looking like his crazy self! I love his oversized robe, with the insane collar. 

Before we look at his other angles, let’s have a good look at that book of his:

Love the sculpting on this. Everything has been painted well, with minimal slop. Love the attention to detail they’ve put into this part of him. 

Left side:

Love the blue highlights on the cowl. Here you can see there is some concession to marking out his under-robe, but it sort of falls short for me. 

Right side:

Here it almost looks like the upper robe is recessed instead of the under-robe. No wonder i was confused initially. Lovely shading accents throughout his robe, on all layers. Really adds to the detail, and gives this figure a scale feel. 

Back:

The fabric on his cape hangs well, and looks good with the blue highlight. 

Overall I’m really happy with this figure. Don’t think I could ask for much better. Just for that under-robe really! I’d recommend this figure, if you can get a hold of it. Most of the Fate/Zero DXF figures are hard to get hold of now.